FTTH Plastic Tensioners for drop cable

YLTELECOM supply FTTH Plastic Tensioners for drop cable  in a low prices but good quality, each single piece of FTTH Plastic Tensioners for drop cable  is tested in the factory before delivering to the client.

The  FTTH Cabling Accessories are fully qualified to RoHS standards and ISO9001:2008. 

Quick detials:

1. To drop cable 2x20AWG and 2x17AWG

2. Wing resistance voltage at yield point: 36 N / mm2.

3. IZOD impact strength with notch at 23 ° C: 40 J / M

4. Elongation at yield point: 12%

5. Density : 0,9 gr./cm3.

6. Breaking load of 30N / mm.

7. Insulation resistance 10¹³ (13)  Ω

10. Tensile strength: minimum of 60 Kg./mm2.

DRAWING & DIMENSIONS

We supply S Type Fasteners,Dead-End Clamp FTTH Cabling Accessories with very competitive prices, every single piece of S Type Fasteners for FTTH Installation is tested in the workshop before delivering to the customer.

Fiber cable of S Type Fasteners for FTTH Installation are designed and manufactured in  ISO9001 registered facility.

The product range covers both single mode and multimode pigtails and pigtails which are fully qualified to RoHS standards.

Assemblies are available in all major fiber optic connector types; a range of cable color options available.

1. The body is made of steel,flame retardant .

2. for easy and strong installation of drop cables between pole and customer premises wall.

3. Effective and time saving for cabling.

4. ISO 9001:2008 Certified

Description:

The FTTH Installation Accessories Set concludes:junction box,fiber wall socket(also named Single family unit rosette,SFU rosette),draw hooks,cable clamp,cable wall bushings,cable glands,cable clips,tail duct,cable wiring duct,nail clip.

Cable bushings were originally designed for indoor use on sheet rock.Cable bushings are plastic grommets inserted into a wall to provide a clean appearance for coax cable,Fiber Optic Cable and all cable entry. Cable bushings are a low cost and fast alternative to installing traditional wall plates.They protect the cable from sharp edges when in applications. We offer different shape and size cable wall bushings,wall tubes,fiber inside corner,fiber outside corner,flat elbow,raceway duct fitting,raceway molding,bend radius,tail duct,cable clamp,wiring duct.All used for fiber optic cabling and other wire cabling projects.

Fiber Optic Exterior Slack Storage W/O Holes hidden and organized.Slack storage box is used for exterior slack storage applications using single fiber cable. There are two stackable storage spools that allow storage of multiple single fiber cable drops. Both of these spools are removable. In an instance where only one spool is sufficient, the spool can either be secured at a lower level or can be mounted at an elevation onto the risers off the back of the inside of the box as a spool on the upper level. This allows additional storage under the spool.

Fiber Inside Corner, Inside corner for the self adhesive single fiber molding.

Fiber Flat Elbow, Flat elbow for the self adhesive single fiber molding.

Fiber Outside Corner,Outside corners for the self adhesive single fiber molding.

Self Adhesive Single Fiber Molding

Cable drawing hooks are made of metal,hanging hardware, hard material,with splint type and C type for option.The conduit box,pipe joint box single gang or double gang are made of PC material,fire restardant.